PRODUCT QUALIT AND RELIABLE
Name :Stainless Steel CNC Fiber Laser Cutting Machine 1064nm Laser Wave Length Low Maintenance
Keywords:Fiber laser cutting machine
Control system:Shanghai cypcut
laser wave length:1064nm
Cooling mode:Water cooling with water chiller
Working Table:Sawtooth Platform
Fiber laser source:IPG , Raycus, Nlight ,Etc
1500*3000MM CNC Laser Cutter , 1200W Fiber Laser Cutting Machine for Stainless Steel.
Description of the Machine
The principal characteristics of the APEX-2040 1000w Fiber laser cutting equipment are:
Fiber laser cutting machine advantages
1. Very fast speed: Compared with Co2 laser machine ,It has double cutting speed
3. Less maintenance cost: It do not need gas lasers, optical fiber transmission, reflecting lenses, etc ,It can save a lot of maintenance costs.
4. Easy operation and maintenance: optical transmission, no need to adjust the optical path.
Single table, auto feeding shuttle table,
Enclosed table, open table all available,
Plate and tube cutting table, tube cutting machine available,
Configuration of the Machine:
1: Direct control of all the fiber laser functions;
2: Synchronized control of the laser source;
3: Overall power control;
4: High speed perforation;
5: Edge machining function;
6: Cutting data library;
7: High speed
1: Manual focal position adjustment;
2: No-contact height sensor;
3: Horizontal lens adjustment;
4: Germany brand
1: Recognized by over 300 domestic and foreign laser companies;
2: Approved by over 100000 clients;
3: Stable operation on over 20000 sets cutting machine;
4: Able to complete from the design, map and process;
5: Simple, efficient, powerful and reliable
1: Exclusive for Laser machines;
2: Multiple protection functions, passive alarm terminals and remote control terminals, easy to achieve centralized CNC control and monitoring;
3: System components are used internationally renowned brands to ensure that the equipment has excellent quality and good reliability
|Square Guide Rail||HIWIN from Taiwan||
1: Precise design, easy to install;
2: High rigidity and overweight load capacity;
3: Low noise, smooth movement
|Rack and Pinion system||ABBA from Taiwan|
|Driving System||YASKAWA from Japan||
1: Servo Motor with high precise;
2: Able to control cutting speed and position;
3: Stable running, lower speed without vibration phenomenon;
4: Better overload capacity
|Reducer||Shimpo from Japan||
1: Helical gear replacing previous spur gear, lower noice;
2: Back to the gap below 0.05 arc points;
3: Low pulsating rotation smooth;
|Oil Injection System||Zhejiang||
After using some time, Rack & Pinion and guide rails always need maintained by inject oils. Make sure the machine keep moving fluently and in good precision
|The electromagnetic valve||Taiwan AirTAC||Max. Pressure 30KG|
|Proportional valve(Optional)||Japan SMC||ITV 2000|
Ø Cutting Gases
Consumption of cutting gases O2 or N2
|Material and application dependence|
N2 Primary dynamic pressure in machine connection:
|25 bar (1,600 l/min.)|
N2 Primary static pressure in machine connection:
O2 Low dynamic pressure in machine connection:
|10 bar (500 l/min.)|
O2 Low static pressure in machine connection:
Pressure of gases in the nozzle:
|0,1 bar a 20 bar|
|8 bar / 400 l / min|
The process feed connectors (O2 /N2 ) between the couplings and the machine connections must be supplied and installed by the client.
The tubes must be made of copper or VA stainless steel, non-oxidised and clean. The authorized gas installer must first establish the dimensions of the gas tubing for the processing gases as specified in the regulations as outlined above (usual diameter: 21 mm)
Quality of the cutting gases
|Type of gas||Quality||Purity[Vol. %]||
Nitrogen and argon content
||Oxygen content (O2) [ppm]||
|Nitrogen N2||4.5||≥99.995||≤10||≤5||Totally oxide free, guaranteed sheen|
|Nitrogen N2||5.0||≥99. 999||≤3||≤5||Totally oxide free,guaranteed sheen|
1, Within 7 days since your local customs clearance: if the cnc router’s any parts has any problems, we will change it free.
2, Exceed 7 days since your local customs clearance but within warranty period: if the cnc router parts have any problems, we can change the old machine parts to new ones free, but you should pay all the shipping cost.
3, Exceed warranty period: if the cnc router parts have any problems, we can offer new machine parts with cost price and you also should pay all the shipping cost.
4, We offer 24 hours technical support by call, and email.
6, We can record videos of operating the laser machine.
7, Free training course in our factory.
8, Machine will be adjusted before it is delivered , operation disk/CD was included.