Hot Sale for Hitbox Plasma Cutter - 5×10 Hypertherm Plasma Cutter for Sheet Metal and Metal Pipe – Apex

Product Descriptions

APEXCNC is a professional Hypertherm plasma table manufacturer, we have different plasma cutting table for option, such as 4×4 plasma table, 4×8 plasma table, 5×10 plasma table or other customized sizes.

Technical Parameters of 5×10 Hypertherm plasma cutter for Sheet Metal and Metal Pipe

Hypertherm Plasma Cutter Cutting Capacity of Plasma Power Supply

Features of 5×10 Hypertherm Plasma Cutter for Sheet Metal and Metal Pipe

1. The plasma cutting table size is 5×10, the rotary device with diameter 300mm and 3000mm length. Other sizes are optional based on your cutting plan.

2. The plasma power supply can be equipped with USA Hypertherm brand or Chinese Huayuan brand

3. Hypertherm 5×10 plasma table adopts STARFIRE numerical control system disposes high, the automatic striking arc, the performance is stable.

4. The 5×10 plasma cutter adopts lubrication system, auto fume extraction system and dust proof.

5. The Y axis used dual-motor driven system, X, Y, Z axis all use Taiwan Hiwin square rails which make the machine driving smoothly with high precision.

6. You can also choose flame cutting for above 30mm thickness.

7. The CNC drilling head can be used for high speed metal hole drilling.

The plasma cutting technology of Hypertherm integrates many new technologies and realizes the practical application of plasma cutting technology. Even compared with the previous generation of high-precision plasma system, it is also very different. When cutting low carbon steel, the traditional plasma cutting technology can basically achieve the range of ISO, the high-precision plasma cutting technology can basically achieve the range of 3-4, while the Hypertherm plasma cutting technology can basically achieve the range of 2-3. Another difference is that Hypertherm plasma cutting technology can extend the service life of vulnerable parts, and the effect is much better than previous generations of systems.

When 125A or higher current is used to cut materials with thickness greater than 12mm, the cutting quality of XPR in the life cycle of vulnerable parts can almost reach the cutting quality of range 3. When the thinner material is less than 10mm by low current process, the cutting quality of Hypertherm series products can reach ISO range 2.

When cutting thinner materials less than 10mm, more than 1100 times of cutting test in 20 seconds of Hypertherm plasma cutting process were stable within the cutting quality of ISO range 2, and then it changed to the cutting quality of range 3. This is a comparison with the cutting quality of the previous generation of high-precision plasma cutting systems in ranges 3 and 4.

In comparison with fiber laser cutting, we found that the cutting quality of Hypertherm plasma cutting is not inferior to laser cutting in many thickness. In two examples of cutting 6mm and 12mm plates, the cutting speed of this Hypertherm process combines quality and production efficiency (rather than focusing only on cutting quality). When cutting 6mm plate, the average angle deviation of cutting edge is smaller, and the deviation fluctuation will be minimized after 1000 arc strikes. The effect of cutting 12mm low carbon steel is similar.

International Shipping Around the World

All the CNC machines can be shipped worldwide by sea, by air or by international express logistics via DHL, FEDEX, UPS. You are welcome to get a free quotation by filling up the form with name, email, detailed address, product and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.