When we use the wood cnc router, it is inevitable that we will encounter some failures, so what causes these failures? Below we will briefly analyze several common wood cnc router faults for everyone.

1. An error occurred in the engraving machine. There are many reasons for this situation, such as control card looseness or failure, driver failure, stepper motor failure, electrostatic interference, motor line failure, data line failure, path error, coupling fracture or loose processing speed too much fast. This requires us to investigate one by one before we can discover the real cause.

2. The engraving machine has different engraving depths. The reasons for this type of failure are: control card looseness or failure; stepper motor failure, drive failure or current subdivision is inconsistent with the software settings, z-axis motor line failure, spindle motor failure, inverter interference or data settings are incorrect, Static interference, computer viruses or system problems, uneven working platforms.

3. Engraving machine chaotically. This is also a common fault. The main reasons for this fault are as follows: control card fault, inverter interference, file path error, static electricity interference, software setting problem, driver fault or current subdivision setting error, Data line failure; ⑧The computer has virus or system problems.

In fact, there are many reasons for the failure of wood cnc routers. Therefore, no matter what the failure is, we need to look for the cause patiently and meticulously, and then we can really solve the problem.