Laser marking machine is a high-tech modern technical equipment. Laser marking machine equipment is widely used. Many words on various electronic components and building materials are marked by laser marking machine. However, there will be some faults when using this equipment, such as different depths of marking text and patterns. What should be done in this case? Let’s explain it in detail.

1. The lens has stains or scratches. Solution: if there are stains, you can use cotton swabs and alcohol to scrub the lens, beam expander and focus lens. Just wipe the substances on the surface. Remember not to wipe the lens with hard objects; If the lens is scratched or otherwise damaged, only the marking machine lens can be replaced.

2. If the optical path deviates, the solution: if the optical path deviates, just readjust the optical path.

3. Marking speed is too fast and filling method is unreasonable
Solution: reduce the marking speed and adjust the original filling mode. In addition, determine whether the workpiece is above and readjust the focus.

4. Current problem of marking machine
Solution: if the power supply current of the equipment is too small, it will also affect the depth of the marked pictures. At this time, increase the current of the laser power supply and reduce the frequency of the marking machine, so that the marking machine can operate normally and avoid the situation that the marked words are too shallow.
For the problem of different picture and text depth of the laser marking machine, we can refer to the above methods. Of course, the better method is to prevent it when using it. In ordinary times, we should pay more attention to the working state of the laser marking machine and eliminate the hidden danger of the problem before the problem occurs.